When you hire AZ Desert Rat Painting, there will be attention to detail. When prepping an interior wall for paint we follow this process:

How to Prep Walls For Painting (For Best Results!)

1. Repair Holes in the Dry Wall
2. Sand Until The Wall and baseboards are Smooth
3. Dull the Surface For Paint and use Primer if needed
4. Inspect Caulking and fix if needed
5. Ensure Walls are Clean and Dust Free
6. Remove Outlet and Switch Plates
7. Apply Frog Tape Painter's Tape
8. Use The Best Painting Supplies

   9. Mask and cover all areas to that do not need paint!

 10. Interior painting at times will require two coats for complete coverage

 11. Make sure all cut ins are straight and clean looking. Remove all masking and inspect for any touch ups

 12. Clean up and leave the job just as we found it

For exterior walls we follow these steps for best results:

1. A clean surface is essential for a good paint job. We will power wash the exterior to ensure a clean surface
2. Scrape away loose paint along facia
3. Repair any surface flaws with a surface repair compound rated for exterior use, stucco cracks will be addressed
4. Remove old caulk and replace as needed
5. Mask all windows
6. Use drop cloths to protect bushes, flowerbeds, decks, lawns and sidewalks.

   7.  Spray all exterior using Graco Sprayers. Brush and rollers will be used when special coverage is needed

   8. Once painting is complete, all masking will be removed and

walls will be inspected for any touchups if needed